Platinum Electric Low-Clearance Recess Kit
Platinum Electric Low-Clearance Recess Kit
Platinum Electric Low-Clearance Recess Kit
The Platinum Electric Low-Clearance Recess Kit is a premium recessed kit that allows for the discrete flush-mounting of Bromic Platinum Smart-Heat™ Electric heaters into ceilings – even where space is limited. The kit is designed to enable flush mounting in ceiling joists with a ceiling depth down to approximately 180 mm, while ensuring all safety distances and temperatures are managed in a controlled manner.
The integrated temperature control frame and built-in cooling fan allow the kit to reduce the installation clearance in the ceiling without compromising safety or performance. All necessary hardware for flush mounting of the Platinum and Platinum Marine series is included, providing a clean, minimalist solution where the heater virtually disappears visually into the ceiling.
Advantages
- Enables flush, recessed mounting in ceilings with low headroom (ceiling depth from approx. 180 mm)
- Integrated temperature control frame that reduces required installation clearances
- Built-in cooling fan with separate power supply for safe operation even in confined spaces
- Supplied complete with parts and mounting hardware for the Platinum and Platinum Marine series
- Provides a modern, minimalist look where the heater blends into the ceiling
- Suitable for both new construction and retrofitting/renovation
Applications
Perfect for terraces, conservatories, pergolas, balconies, outdoor dining areas, and other premium outdoor environments where design, ceiling height, and lines are at least as important as comfort.
Compatibility
The kit is intended for flush mounting of:
- Bromic Platinum Smart-Heat™ Electric
- Bromic Platinum Marine
Available for various wattages (e.g., 2300 W, 3400 W, 4500 W). Always check the product sheet and installation instructions for exact model and wattage adaptation.
Installation
Important: The kit requires a separate power supply for the built-in cooling fan, independent of the heater's electrical connection. Installation must always be performed by a qualified electrician and in accordance with Bromic's installation manual and applicable electrical and fire safety regulations.